CNC Milling - Horizonal and Vertical



One(1) PFH-4800 Horizontal Machining Center
- with two(2) pallets and 80 ATC.

The PFH-4800 is a pallet shuttle system which allows one pallet to be setup while machining is being performed on the other. The PFH-4800 provides high-speed , high efficiency machining with feed rates of up to 2362 IPM for X, Y, & Z axes.  The spindle speed is 12,000 RPM.  Chip to chip time is 2.2 seconds.  Our PFH-4800 is also outfitted with a 4th axis capable of 360,000 positions.  Equipped with Mazatrol Fusion 640 CNC control and Renishaw Touch-Probe.





One(1) FH-480 Horizontal Machining Center - with six(6) pallet changer and 120 ATC.

One(1) FH-480 Horizontal Machining Center - with two(2) pallets and 60 ATC.

The FH-480 is a pallet shuttle system which allows one pallet to be setup while machining is being performed on the other. Pallet-to-pallet change takes just five seconds, while tool-to-tool change is a mere 1.3 seconds.  Equipped with Mazatrol Fusion 640 CNC control and Renishaw Touch-Probe. The powerful 30 HP spindle drive with 195 ft. lbs. of torque increases productivity immediately. Using a No. 40 taper milling tool, metal removal rates can be achieved at more than 40 cu. in./min. in steel using high torque capabilities, and a blazing 136 cu. in./min. in aluminum with the spindle speed of 12,000 RPM. The top speed can be reached in 1.5 seconds. Our FH-480 is also outfitted with a 4th axis capable of 360,000 positions. Another outstanding feature of Mazak's FH-480 horizontal machining center is its rigidity. This allows part accuracy and consistency to be maintained anywhere in the machining envelope, with .00004 repeatability, and .00012 accuracy.


One(1) Nexus 530-II Vertical Machining Center
Nexus 530-II

Mazak Matrix Control
48-tool magazine
12,000 RPM Spindle
4th Axis Rotary Table
Renishaw Touch-Probe



One(1) Nexus 510C-II Vertical Machining Center


Mazatrol Matrix Control
48-tool magazine
12,000 RPM spindle
4th Axis Rotary Table
Renishaw Touch-Probe
Wide machining envelope
Environmentally-friendly – with minimum consumption of pneumatic and electrical power





One(1) Nexus 510C Vertical Machining Center

Mazatrol Fusion 640 CNC Control
30-tool magazine
12,000 RPM spindle
4th Axis Rotary Table
Renishaw Touch-Probe
Wide machining envelope
Environmentally-friendly – with minimum consumption of pneumatic and electrical power





One(1) Nexus 410 Vertical Machining Center


Mazatrol Fusion 640 CNC Control
30-tool magazine
12,000 RPM spindle
4th Axis Rotary Table
Renishaw Touch-Probe
Environmentally-friendly – with minimum consumption of pneumatic and electrical power





Okuma-Howa 3VADS
- Two (2) Verticle Twin Spindle Machining Centers with Fanuc 11M CNC, 6000RPM, 24 ATC.

Our Address: